{"id":2537,"date":"2021-09-17T10:23:30","date_gmt":"2021-09-17T17:23:30","guid":{"rendered":"http:\/\/koentoppguitars.com\/blog\/?p=2537"},"modified":"2021-12-17T10:27:43","modified_gmt":"2021-12-17T17:27:43","slug":"fhole-bender","status":"publish","type":"post","link":"https:\/\/koentoppguitars.com\/blog\/fhole-bender\/","title":{"rendered":"Fhole Bender"},"content":{"rendered":"

Since I\u2019ve been on benders lately, I\u2019d thought I\u2019d share this one 🙄🤓. This one is similar to my gravity bender<\/a> in that the finished form is what I\u2019m using to bend the wood around.<\/p>\n

I\u2019ve tried everything with fhole bending: bushings, soldering guns, bolts and blow torches, jigs that attached to my bending pipe, adjusting thicknesses, wood grain, and even the microwave! The common thread to success with any of them was supporting the bend as much as possible and that\u2019s really hard to do on such a tiny radius with a thickness of wood that just doesn\u2019t want to bend that much. The more support, the more success!<\/p>\n

The idea of this jig evolved from a previous one where I tried squeezing the wood against a hot metal bushing with a cam mounted against it and it sat on top of my iron (I included pics of it). It worked quite well but i knew it wasn\u2019t 100% there. This new bender is full proof and now I can\u2019t wait to get to my next fholes! The feeling of ease as it\u2019s pulling around that tight upper eye is so rewarding and it makes the time it took to make the jig totally worth it.<\/p>\n

It has 2- 50Watt heater cartridges in it, one right in the center of the fhole eye as well as the thermocoupler right next to it so I can easily monitor and control the temp.<\/p>\n

Side note- this was my ever first attempt at milling aluminum on my CNC. It was a huge learning experience and I\u2019m very grateful to\u00a0@fink.instruments<\/a>\u00a0for his help and emotional support through the process. There were definitely a few hairy moments \ud83d\ude09 if I had those moments in camera I\u2019d certainly share those!<\/p>\n

 <\/p>\n

\"\"<\/a>

Koentopp Fhole Bender<\/p><\/div>\n

 <\/p>\n

\"\"<\/a>

Milling a billet of 6061 Aluminum<\/p><\/div>\n

 <\/p>\n

\"\"<\/a>

Not a bad surface finish!! (I’m still learning)<\/p><\/div>\n

 <\/p>\n

\"\"<\/a>

A thin stainless steel strap and locking wedge allow constant support, which is why this works so well<\/p><\/div>\n

 <\/p>\n

\"\"<\/a>

This binding is .950″ thick and bent to about .25″ radius, bonkers!<\/p><\/div>\n

 <\/p>\n

\"\"<\/a>

I’ve always laminated my bindings prior to glueing into the top; less fuss and easier install (especially when there are only two mitres in the overall assembly).<\/p><\/div>\n

 <\/p>\n

\"\"<\/a>

A full set of Fhole bindings for one guitar<\/p><\/div>\n

 <\/p>\n

\"\"<\/a>

Tapered plugs snug up the eye’s<\/p><\/div>\n

 <\/p>\n

\"\"<\/a>

Normally, we see Fhole bindings thin out as they wrap around the tight bends, this new bending method alleviates the need from doing that and the overall look is much more uniform.<\/p><\/div>\n","protected":false},"excerpt":{"rendered":"

Since I\u2019ve been on benders lately, I\u2019d thought I\u2019d share this one 🙄🤓. This one is similar to my gravity bender in that the finished form is what I\u2019m using to bend the wood around. I\u2019ve tried everything with fhole bending: bushings, soldering guns, bolts and blow torches, jigs that attached to my bending pipe, […]<\/p>\n","protected":false},"author":1,"featured_media":2565,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"om_disable_all_campaigns":false,"_mi_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0},"categories":[1],"tags":[102,50,92,209,208,95,84,93,106,107,113,51,12,41,157,207,38,63,67,24,100,105,42,28,44,101,97,71],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/koentoppguitars.com\/blog\/wp-json\/wp\/v2\/posts\/2537"}],"collection":[{"href":"https:\/\/koentoppguitars.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/koentoppguitars.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/koentoppguitars.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/koentoppguitars.com\/blog\/wp-json\/wp\/v2\/comments?post=2537"}],"version-history":[{"count":2,"href":"https:\/\/koentoppguitars.com\/blog\/wp-json\/wp\/v2\/posts\/2537\/revisions"}],"predecessor-version":[{"id":2563,"href":"https:\/\/koentoppguitars.com\/blog\/wp-json\/wp\/v2\/posts\/2537\/revisions\/2563"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/koentoppguitars.com\/blog\/wp-json\/wp\/v2\/media\/2565"}],"wp:attachment":[{"href":"https:\/\/koentoppguitars.com\/blog\/wp-json\/wp\/v2\/media?parent=2537"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/koentoppguitars.com\/blog\/wp-json\/wp\/v2\/categories?post=2537"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/koentoppguitars.com\/blog\/wp-json\/wp\/v2\/tags?post=2537"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}